Composition and Properties of Drilling and Completion Fluids, Seventh Edition, delivers the most up-to-date information on drilling fluid choices and techniques. Long considered the mud bible for the oil and gas professional for over 60 years, this revised reference presents the service provider and operator with full disclosure on the many drilling and completion fluid chemistries available so that all parties are aware of not only their options prior to well selection, but also the latest environmental regulations and limitations of usage. New additions to the edition include a completely revised chapter on the introduction to drilling fluids, updated information on the evaluation of drilling fluids, common drilling challenges, and an entirely new chapter devoted to fracturing to meet today’s market needs for the new and veteran oil and gas professional. The book remains the critical resource for making the best chemical and process flow selections when drilling and completing today’s more complex oil and gas wells. Updated and reorganized with completely new material on all fracturing fluids, evaluation techniques, and drilling waste management Defined as the mud bible since its first publication in 1948 Upgraded with the newest references and regulations necessary to ensure safe and sustainable working conditions for the well and rig personnel
The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. Explains a myriad of new products and fluid systems Cover the newest API/SI standards New R&D on water-based muds New emphases on Health, Safety & Environment New Chapter on waste management and disposal
Rev. ed. of: Composition and properties of drilling and completion fluids / H.C.H. Darley, George R. Gray.
"The book is aimed at narrowing the gap between industrial aspects of mud engineering and its academic basics. It also sums up the experience of handling unconventional and unforeseen problems related with well-bore instability with the right composition of mud to facilitate correct properties in drilling fluid design, and thus minimize/eliminate non-productive time. If the book is able to fulfil any / all of these objectives, then the purpose of writing the book is served. It aims to reach out to petroleum engineering students and those mud engineers who have just begun their career in oil field, with many questions wandering in their minds, and aims to answer them in a manner that makes sense to their limited exposure with the least technical jargon but yet, effectively quench their thirst of inquisitiveness. For the professionals who aspire to climb the ladders of success to reach the corporate jungle, the book cautions them that what appears costly superficially need not be always costly and thus spend enough money to have a right team of professionals surrounding them and not the guys who will always agree to them for the fear of loss of their job."
Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs.
The oil and gas engineer on the job requires knowing all the available oil field chemicals and fluid applications that are applicable to the operation. Updated with the newest technology and available products, Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids, Second Edition, delivers all the necessary lists of chemicals by use, their basic components, benefits, and environmental implications. In order to maintain reservoir protection and peak well production performance, operators demand to know all the options that are available. Instead of searching through various sources, Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids, Second Edition, presents a one-stop non-commercialized approach by organizing the products by function, matching the chemical to the process for practical problem-solving and extending the coverage with additional resources and supportive materials. Covering the full spectrum, including fluid loss additives, drilling muds, cement additives, and oil spill treating agents, this must-have reference answers to every oil and gas operation with more options for lower costs, safer use, and enhanced production. Effectively locate and utilize the right chemical application specific to your oil and gas operation with author’s systematic approach by use Gain coverage on all oil field chemicals and fluids needed throughout the entire oil and gas life cycle, including drilling, production, and cementing Understand environmental factors and risks for oil field chemicals, along with pluses and minuses of each application, to make the best and safest choice for your operation
Oil Field Chemicals
Author: Johannes Fink
Oil field chemicals are gaining increasing importance, as the resources of crude oil are decreasing. An increasing demand of more sophisticated methods in the exploitation of the natural resources emerges for this reason. This book reviews the progress in the area of oil field chemicals and additives of the last decade from a rather chemical view. The material presented is a compilation from the literature by screening critically approximately 20,000 references. The text is ordered according to applications, just in the way how the jobs are emerging in practice. It starts with drilling, goes to productions and ends with oil spill. Several chemicals are used in multiple disciplines, and to those separate chapters are devoted. Two index registers are available, an index of chemical substances and a general index. * Gives an introduction to the chemically orientated petroleum engineer. * Provides the petroleum engineer involved with research and development with a quick reference tool. * Covers interdisciplinary matter, i.e. connects petroleum recovery and handling with chemical aspects.
When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. Pinpoints the specific compounds used in any given fracturing operation Provides a systematic approach to classifying fracturing fluid technology to meet specific project needs Eliminates guesswork with easy-to-understand language on selection and components of hydraulic fracturing chemicals Addresses environmental aspects of chemicals to safeguard employees and protect the environment
Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. Matchless in-depth technical advice for achieving operational excellence with advance solutions.
Working Guide to Drilling Equipment and Operations offers a practical guide to drilling technologies and procedures. The book begins by introducing basic concepts such as the functions of drilling muds; types of drilling fluids; testing of drilling systems; and completion and workover fluids. This is followed by discussions of the composition of the drill string; air and gas drilling operations; and directional drilling. The book identifies the factors that should be considered for optimized drilling operations: health, safety, and environment; production capability; and drilling implementation. It explains how to control well pressure. It details the process of fishing, i.e. removal of a fish (part of the drill string that separates from the upper remaining portion of the drill string) or junk (small items of non-drillable metals) from the borehole. The remaining chapters cover the different types of casing and casing string design; well cementing; the proper design of tubing; and the environmental aspects of drilling. Drilling and Production Hoisting Equipment Hoisting Tool Inspection and Maintenance Procedures Pump Performance Charts Rotary Table and Bushings Rig Maintenance of Drill Collars Drilling Bits and Downhole Tools
Reservoir Formation Damage
Author: Faruk Civan
Publisher: Gulf Professional Publishing
Reservoir Formation Damage, Third Edition, provides the latest information on the economic problems that can occur during various phases of oil and gas recovery from subsurface reservoirs, including production, drilling, hydraulic fracturing, and workover operations. The text helps readers better understand the processes causing formation damage and the factors that can lead to reduced flow efficiency in near-wellbore formation during the various phases of oil and gas production. The third edition in the series provides the most all-encompassing volume to date, adding new material on conformance and water control, hydraulic fracturing, special procedures for unconventional reservoirs, field applications design, and cost assessment for damage control measures and strategies. Understand relevant formation damage processes by laboratory and field testing Develop theories and mathematical expressions for description of the fundamental mechanisms and processes Predict and simulate the consequences and scenarios of the various types of formation damage processes encountered in petroleum reservoirs Develop methodologies and optimal strategies for formation damage control and remediation
Author: Djebbar Tiab, Erle C. Donaldson
Publisher: Gulf Professional Publishing
Petrophysics: Theory and Practice of Measuring Reservoir Rock and Fluid Transport Properties, Fourth Edition provides users with tactics that will help them understand rock-fluid interaction, a fundamental step that is necessary for all reservoir engineers to grasp in order to achieve the highest reservoir performance. The book brings the most comprehensive coverage on the subject matter, and is the only training tool for all reservoir and production engineers entering the oil and gas industry. This latest edition is enhanced with new real-world case studies, the latest advances in reservoir characterization, and a new chapter covering unconventional oil and gas reservoirs, including coverage on production techniques, reservoir characteristics, and the petrophysical properties of tight gas sands from NMR logs. Strengthened with a new chapter on shale oil and gas, adding the latest technological advances in the field today Covers topics relating to porous media, permeability, fluid saturation, well logs, Dykstra-Parson, capillary pressure, wettability, Darcy's law, Hooke's law, reservoir characterization, filter-cake, and more Updated with relevant practical case studies to enhance on the job training Continues its longstanding, 20-year history as the leading book on petrophysics
Standard Handbook of Petroleum and Natural Gas Engineering, Third Edition, provides you with the best, state-of-the-art coverage for every aspect of petroleum and natural gas engineering. With thousands of illustrations and 1,600 information-packed pages, this handbook is a handy and valuable reference. Written by dozens of leading industry experts and academics, the book provides the best, most comprehensive source of petroleum engineering information available. Now in an easy-to-use single volume format, this classic is one of the true "must haves" in any petroleum or natural gas engineer's library. A classic for over 65 years, this book is the most comprehensive source for the newest developments, advances, and procedures in the oil and gas industry. New to this edition are materials covering everything from drilling and production to the economics of the oil patch. Updated sections include: underbalanced drilling; integrated reservoir management; and environmental health and safety. The sections on natural gas have been updated with new sections on natural gas liquefaction processing, natural gas distribution, and transport. Additionally there are updated and new sections on offshore equipment and operations, subsea connection systems, production control systems, and subsea control systems. Standard Handbook of Petroleum and Natural Gas Engineering, Third Edition, is a one-stop training tool for any new petroleum engineer or veteran looking for a daily practical reference. Presents new and updated sections in drilling and production Covers all calculations, tables, and equations for every day petroleum engineers Features new sections on today's unconventional resources and reservoirs
Once thought of as niche technology, operators today are utilizing more opportunities with casing and liners as formations and environments grow in difficulty, especially with the unconventional oil and gas boom. Casing and liners for Drilling and Completions, 2nd Edition provides the engineer and well designer with up-to-date information on critical properties, mechanics, design basics and newest applications for today’s type of well. Renovated and simplified to cover operational considerations, pressure loads, and selection steps, this handbook gives you the knowledge to execute the essential and fundamental features of casing and liners. Bonus features include: Additional glossary added to explain oil field terminology New appendix on useful every day formulas such as axial stress, shear stress in tubes and principal stress components Listing section of acronyms, notations, symbols and constants for quick reference Concise step-by-step basic casing design procedure with examples Thorough coverage and tips on important field practice for installation topics Advanced methods for critical and horizontal well casing design including hydraulic fracturing Exhaustive appendices on foundational topics: units & nomenclature, solid mechanics, hydrostatics, borehole environment & rock mechanics, and a summary of useful formulas